Linuxで起動時のメッセージ（ログ）を見るには
Linuxの起動時には実にさまざまなメッセージが表示される。
しかし、スクロールが速すぎて、起動時に内容をじっくり確認することはできない。Linux起動後に、そのメッセージを見るには、dmesgコマンドを使用する。
また最近の、vine などでは起動時にこのメッセージが見られない。
そんな時便利なコマンドがある。
# dmesg
==========================================================
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux
version 3.4.106-3vl6 (ｘｘｘｘｘｘｘ@natsume.home.local) (gcc
version 4.4.5 20101001 (Vine Linux 4.4.5-6.1vl6) (GCC) ) #1 SMP Fri Mar 27
14:13:42 JST 2015
Command line: ro root=/dev/VolGroup00/LogVol00
resume=swap:/dev/VolGroup00/LogVol01 vga=0x314 splash=silent quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000
(usable)
BIOS-e820: 000000007fff0000 - 0000000080000000 (ACPI
data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
NX
(Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH
VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove
range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge
found
last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type:
uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized
system.
found SMP MP-table at [ffff88000009fff0] 9fff0
initial memory
mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size
20480
init_memory_mapping: 0000000000000000-000000007fff0000
0000000000 -
007fe00000 page 2M
007fe00000 - 007fff0000 page 4k
kernel direct mapping
tables up to 0x7ffeffff @ [mem 0x1fffc000-0x1fffffff]
RAMDISK: 37912000 -
37ff0000
ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
ACPI: XSDT
000000007fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI:
FACP 000000007fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL
00000061)
ACPI: DSDT 000000007fff0470 01BF1 (v01 VBOX VBOXBIOS 00000002
INTL 20100528)
ACPI: FACS 000000007fff0200 00040
ACPI: APIC
000000007fff0240 00054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI:
SSDT 000000007fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL
20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration
found
Faking a node at 0000000000000000-000000007fff0000
Initmem setup
node 0 0000000000000000-000000007fff0000
NODE_DATA [mem
0x7ffca000-0x7ffeffff]
[ffffea0000000000-ffffea0001ffffff] PMD ->
[ffff88007d600000-ffff88007f5fffff] on node 0
Zone PFN ranges:
DMA
0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
Early memory PFN
ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 ->
0x0007fff0
On node 0 totalpages: 524159
DMA zone: 64 pages used for
memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO
batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 512048
pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC
address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000]
gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI
0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI:
INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by
override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by
override.
Using ACPI (MADT) for SMP configuration information
SMP:
Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory:
00000000000a0000 - 00000000000f0000
PM: Registered nosave memory:
00000000000f0000 - 0000000000100000
Allocating PCI resources starting at
80000000 (gap: 80000000:7ffc0000)
Booting paravirtualized kernel on bare
hardware
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1
nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88007fc00000 s76480 r8192
d21824 u2097152
pcpu-alloc: s76480 r8192 d21824 u2097152
alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order,
mobility grouping on. Total pages: 515962
Policy zone: DMA32
Kernel
command line: ro root=/dev/VolGroup00/LogVol00
resume=swap:/dev/VolGroup00/LogVol01 vga=0x314 splash=silent quiet
PID hash
table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP
bridge found
Memory: 2045876k/2097088k available (4675k kernel code, 452k
absent, 50760k reserved, 2748k data, 1072k init)
SLUB: Genslabs=15,
HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU
implementation.
CONFIG_RCU_FANOUT set to non-default value of
32
NR_IRQS:262400 nr_irqs:256 16
Console: colour dummy device
80x25
console [tty0] enabled
allocated 8388608 bytes of
page_cgroup
please try 'cgroup_disable=memory' option if you don't want
memory cgroups
Fast TSC calibration using PIT
Detected 2499.315 MHz
processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4998.63 BogoMIPS (lpj=2499315)
pid_max: default: 32768 minimum:
301
Dentry cache hash table entries: 262144 (order: 9, 2097152
bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys
cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys
devices
Initializing cgroup subsys freezer
Initializing cgroup subsys
net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys
perf_event
mce: CPU supports 0 MCE banks
using mwait in idle
threads.
SMP alternatives: switching to UP code
Freeing SMP alternatives:
24k freed
ACPI: Core revision 20120320
ftrace: allocating 20146 entries in
79 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0:
Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
Performance Events:
unsupported p6 CPU model 58 no PMU driver, software events only.
Brought up 1
CPUs
Total of 1 processors activated (4998.63 BogoMIPS).
devtmpfs:
initialized
dummy:
NET: Registered protocol family 16
ACPI: bus type
pci registered
PCI: Using configuration type 1 for base access
bio: create
slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added
_OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added
_OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI:
Executed 1 blocks of module-level executable AML code
ACPI: Interpreter
enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt
routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows
from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root
Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge
window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window
[io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem
0x80000000-0xffdfffff] (ignored)
PCI: root bus 00: using default
resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus
resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem
0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class
0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci
0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 20:
[io 0xd000-0xd00f]
pci 0000:00:02.0: [80ee:beef] type 00 class
0x030000
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
pci
0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 10:
[mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18: [io
0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci
0000:00:04.0: reg 10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 14: [mem
0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff
pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci
0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 14: [io
0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci
0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0:
[8086:7113] type 00 class 0x068000
pci 0000:00:0b.0: [8086:265c] type 00
class 0x0c0320
pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
ACPI:
PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request
_OSC control (_OSC support mask: 0x0e)
ACPI: PCI Interrupt Link [LNKA] (IRQs
5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI
Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs
5 *9 10 11)
vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb:
loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem
initialized
libata version 3.00 loaded.
usbcore: registered new interface
driver usbfs
usbcore: registered new interface driver hub
usbcore:
registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI:
pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 -
000000000009ffff
reserve RAM buffer: 000000007fff0000 - 000000007fffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus
00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7
window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem
0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xffdfffff
window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp
00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [irq 1]
pnp
00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: [io
0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io
0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device,
IDs PNP0200 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI
device, IDs PNP0f03 (active)
pnp 00:04: [io 0x0378-0x037f]
pnp 00:04:
[io 0x0778-0x077f]
pnp 00:04: [irq 7]
pnp 00:04: Plug and Play ACPI
device, IDs PNP0400 (active)
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus
type pnp unregistered
Switching to clocksource acpi_pm
pci_bus 0000:00:
resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem
0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache
hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table
entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536
(order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144
bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3,
32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768
bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct
PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang
workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default
64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory:
7032k freed
platform rtc_cmos: registered platform RTC device (no PNP device
found)
audit: initializing netlink socket (disabled)
type=2000
audit(1431561576.265:1): initialized
HugeTLB registered 2 MB page size,
pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip
Lougher
aufs 3.4-20120611
msgmni has been set to 4009
Block layer SCSI
generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop
registered
io scheduler deadline registered
io scheduler cfq registered
(default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: mode is
800x600x16, linelength=1600, pages=12
vesafb: scrolling: redraw
vesafb:
Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000,
mapped to 0xffffc90000900000, using 1875k, total 12288k
Console: switching to
colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
GHES:
HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing
enabled
Linux agpgart interface v0.103
brd: module loaded
loop: module
loaded
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting
latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max
UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd
0x170 ctl 0x376 bmdma 0xd008 irq 15
usbcore: registered new interface driver
libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at
0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT
Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
rtc_cmos rtc_cmos: rtc core:
registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes
nvram
input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input1
cpuidle: using governor
ladder
cpuidle: using governor menu
usbcore: registered new interface
driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink
socket
NET: Registered protocol family 17
Registering the dns_resolver key
type
TuxOnIce 3.2.1 (http://tuxonice.net)
TuxOnIce: Ignoring late
initcall, as requested.
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max
UDMA/133
ata1.01: NODEV after polling detection
ata1.00: ATA-6: VBOX
HARDDISK, 1.0, max UDMA/133
ata1.00: 69259776 sectors, multi 128: LBA
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/33
scsi
0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd
0:0:0:0: [sda] 69259776 512-byte logical blocks: (35.4 GB/33.0 GiB)
sd
0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1
sda2
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 32x/32x
xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0:
Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type
5
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock
to 2015-05-13 23:59:37 UTC (1431561577)
Freeing unused kernel memory: 1072k
freed
nash-hotplug (597): /proc/597/oom_adj is deprecated, please use
/proc/597/oom_score_adj instead.
ehci_hcd: USB 2.0 'Enhanced' Host Controller
(EHCI) Driver
ehci_hcd 0000:00:0b.0: setting latency timer to 64
ehci_hcd
0000:00:0b.0: EHCI Host Controller
ehci_hcd 0000:00:0b.0: new USB bus
registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: irq 19, io mem
0xf0805000
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New
USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host
Controller
usb usb1: Manufacturer: Linux 3.4.106-3vl6 ehci_hcd
usb usb1:
SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports
detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd
0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host
Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number
2
ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb2: New USB
device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host
Controller
usb usb2: Manufacturer: Linux 3.4.106-3vl6 ohci_hcd
usb usb2:
SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports
detected
uhci_hcd: USB Universal Host Controller Interface driver
Uniform
Multi-Platform E-IDE driver
device-mapper: uevent: version
1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com
Initializing USB
Mass Storage driver...
usbcore: registered new interface driver
usb-storage
USB Mass Storage support registered.
usb 2-1: new full-speed
USB device number 2 using ohci_hcd
Refined TSC clocksource calibration:
2499.374 MHz.
Switching to clocksource tsc
usb 2-1: New USB device found,
idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1,
Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1:
Manufacturer: VirtualBox
input: VirtualBox USB Tablet as
/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input2
generic-usb
0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet]
on usb-0000:00:06.0-1/input0
TuxOnIce: No image found.
Restarting tasks
... Restarting kernel threads ... done.
done.
TuxOnIce: No image
found.
Restarting tasks ... Restarting kernel threads ...
done.
done.
EXT4-fs (dm-0): mounted filesystem with ordered data mode.
Opts:
udev: starting version 154
microcode: CPU0 sig=0x306a9, pf=0x2,
revision=0x19
input: PC Speaker as
/devices/platform/pcspkr/input/input3
e1000: Intel(R) PRO/1000 Network Driver
- version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel
Corporation.
e1000 0000:00:03.0: setting latency timer to 64
microcode:
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>,
Peter Oruba
input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button
[PWRF]
input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
ACPI: Sleep Button
[SLPF]
ACPI: Deprecated procfs I/F for battery is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery
present)
input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
ACPI:
Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: Deprecated
procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER
cleared
ACPI: AC Adapter [AC] (on-line)
parport_pc 00:04: reported by Plug
and Play ACPI
ppdev: user-space parallel port driver
e1000 0000:00:03.0:
eth0: (PCI:33MHz:32-bit) 08:00:27:ad:2b:4a
e1000 0000:00:03.0: eth0: Intel(R)
PRO/1000 Network Connection
piix4_smbus 0000:00:07.0: SMBus base address
uninitialized - upgrade BIOS or use force_addr=0xaddr
snd_intel8x0
0000:00:05.0: setting latency timer to 64
intel8x0_measure_ac97_clock:
measured 54222 usecs (8471 samples)
intel8x0: measured clock 156228
rejected
intel8x0_measure_ac97_clock: measured 50838 usecs (7201
samples)
intel8x0: measured clock 141646
rejected
intel8x0_measure_ac97_clock: measured 52001 usecs (7200
samples)
intel8x0: measured clock 138458 rejected
intel8x0: clocking to
48000
Adding 4128764k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
extents:1 across:4128764k
EXT4-fs (dm-0): re-mounted. Opts:
(null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version
0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
e1000:
eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
RPC: Registered
named UNIX socket transport module.
RPC: Registered udp transport
module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1
backchannel transport module.
Bluetooth: Core ver 2.16
NET: Registered
protocol family 31
Bluetooth: HCI device and connection manager
initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP
socket layer initialized
Bluetooth: SCO socket layer
initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP
filters: protocol multicast
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using
/var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting
90-second grace period
eth0: no IPv6 routers present
==========================================================
dmesgコマンドによって表示される情報は結構多いので、
# dmesg > boot.txt
のように、ファイルに保存してからエディタなどで見る。
